【MOD】(1.2.1)(1.2.2)(1.2.3)←MOD合集→【有视频】 - Mod回收区

蜘蛛侠hw

本帖最后由路邊電燈泡于 2012-10-7 14:26 编辑

警告请勿转载！
这个合集会不停更新的大家以后可以常来看看有没有更新
搬的幸苦是人的就加点人气吧！

更新状态列表：

时间日期	最后更新MOD名称	一共更新了多少MOD了
2012/3/22	刷怪蛋合成MOD	【20】

下次更新：
保留破坏度MOD
安装MOD必备工具：
ModLoader ， Audiomod , ModLoaderMp , PlayerAPI

点击可以下载

【1】皮肤MOD原帖地址

【2】ZOMBE'S MODPACK原帖地址
【僵尸多功能MOD】

在当前版本的单人只MODS列表：
繁荣 - 又名损害控制
建设 - 又名经典建筑
方向盘 - 又名车控制
箱子 - 又名自动存储
死亡 - 又名死亡行为
挖 - 又名调整挖掘
炉 - 又名自定熔炼
增长 - 又名生长的植物生长
图标 - 又名容器的内容图标
又名项目 - 项目/块属性
矿石 - 又名矿再分配
配方 - 又名自定义合成
调整大小 - 又名小动物的尺寸品种
产卵 - 又名小动物产卵控制
瞬移 - 又名隐形传输
天气 - 天气控制
在当前版本的单人及多人MODS的列表：
欺骗 - 又名金手指
云 - 又名云控制
指南针 - 又名罗盘
合成 - 又名合成全部关键
飞 - 又名飞
信息 - 又名世界信息
路径 - 又名路径跟踪
太阳 - 又称阳光控制
安全 - 又名小动物诞生荧光笔
挥舞 - 又名挥动重点
使用方法详细说明：
\.minecraft\mods\zombe\config.txt
‘安装好后’打开%appdata% 找到.minecraft文件夹打开找到 mods 文件夹然后点击打开 zombe文件夹
打开config.txt 然后你会看见许多代码
代码：

#
# Lines beginning with # are comments.
#
# Full list of key names you will find here:
# [url]http://www.lwjgl.org/javadoc/constant-values.html#org.lwjgl.input.Keyboard.KEY_0[/url]
# NB! omit the "KEY_" in front - ie: "Q" instead of "KEY_Q" etc
# NB! the key names that minecraft uses ignore your keyboard layout settings
# - in other words: they might not correspond to the actual key name.
# NB! easiest way by far to get the correct key names is using minecrafts options menu ;)
# NB! you can not directly bind mouse buttons - you need to bind mouse buttons to keyboard.
# Strongly recommended for "wield" mod.
# NB! for colors you can use the names that are defined in names.txt or use the number
# formatted color directly.
# 0xRRGGBB, where R/G/B are the color components in hexadecimal format.
#
# Easy way to temporarily disable all mods.
disableAllMods = no
# Show options screen
showOptions = F7
# Removes the error message on screen.
# NB! It does not fix anything - just removes the message (up to 8 messages).
clearDisplayedError = F9
# ==================== cloud mod - aka. Cloud Control ========================
# Uncomment to enable mod:
#modCloudEnabled = yes
# Turns clouds on and off.
keyCloudToggle = MULTIPLY
# Toggles between vanilla-minecraft and mod cloud settings.
keyCloudVanilla = V
# Moves clouds up by one minecraft block.
keyCloudUp =
# Moves clouds down by one minecraft block.
keyCloudDown =
# Are clouds enabled at startup.
optCloudShow = yes
# Modifies cloud height. Original offset is 0. [-64.0 .. 64.0]
optCloudOffset = 4
# Tag shown when mod is temporarily disabled and vanilla minecraft cloud settings are in effect.
tagCloudVanilla = no-cloud-mod
# ==================== cart mod - aka. Cart Control ==========================
# Uncomment to enable mod:
#modCartEnabled = yes
# Stops the cart immediately.
keyCartStop = RETURN
# Enable / disable perpetual motion mode.
keyCartPerpetual = UP
# Max speed accumulation. [0.5 .. 5.0]
optCartSpeedAccumCap = 1.0
# Speed change multiplier. [0.5 .. 10.0]
optCartAcceleration = 2.0
# Powered minecarts have infinite fuel (after you add the first drop of fuel).
optCartInfiniteFuel = yes
# Tag shown when perpetual mode is active.
tagCartPerpetual = perpetual
# ==================== build mod - aka. Classic Building =====================
# Uncomment to enable mod:
#modBuildEnabled = yes
# Enable / disable build mode.
keyBuildToggle = B
# Hold down and press number to select item sets from optBuildA1 to optBuildA9.
keyBuildA = LSHIFT
# Hold down and press number to select item sets from optBuildB1 to optBuildB9.
keyBuildB = LCONTROL
# Key used to mark a selection.
# NB! optBuildExtension must be enabled ("= yes" instead of "= no").
keyBuildMark = X
# Copy selection to buffer.
keyBuildCopy = C
# Paste buffer to selection.
# NB! keyBuildFill and keyBuildRemove changes key functionality.
keyBuildPaste = P
# Fill selection with selected (ie. current item in inventory) item.
# NB! optBuildExtension must be enabled ("= yes" instead of "= no").
# NB! keyBuildFill and keyBuildRemove changes key functionality.
keyBuildSet = Z
# Deselect / remove selection markers.
keyBuildDeselect =
# Hold down to fill empty blocks in selection with specific block (keyBuildSet) or copy-paste buffer (keyBuildPaste).
keyBuildFill = LSHIFT
# Hold down to remove matching (keyBuildSet or keyBuildPaste) blocks from selection.
keyBuildRemove = RSHIFT
# Holding this down while setting marker (keyBuildMark) causes the marker to be set on your feet height instead of head.
keyBuildDown = LCONTROL
# Enable in-game world editing.
optBuildExtension = no
# Is build mode activated at startup.
optBuild = no
# Lock item count in stacks.
optBuildLockQuantity = yes
# Lock item count in stacks to a specific number. 0 = do not lock. [0 .. 32]
optBuildLockQuantityToNr = 0
# Digging speed in build mode. [0.1 .. 6.0]
optBuildDigSpeed = 1.0
# Distance where one can dig / place blocks (vanilla game has it at 4.0). [2.0 .. 128.0]
optBuildReach = 16.0
# Block harvesting rule: -1 = never harvest, 0 = vanilla game, 1 = always harvest.
optBuildHarvestRule = -1
# Item sets (look up item names from names.txt).
optBuildA1 = smooth, cobble, grass, dirt, sand, gravel, clay, obsidian, sandstone
optBuildA2 = oak, pine, birch, wood, shelves, chest, workbench, jukebox, furnace
optBuildA3 = woolYellow, woolOrange, woolRed, woolPink, woolMagenta, woolPurple, woolBlue, woolCyan, woolLightBlue
optBuildA4 = woolWhite, woolLightGray, woolGray, woolBlack, woolBrown, woolGreen, woolLime, cage, sponge
optBuildA5 = snowcap, ice, snow, water, lava, fire, glass, pumpkinC, melon
optBuildA6 = sapling, leaves, flowerY, flowerR, shroomB, shroomR, cactus, pumpkin, reed
optBuildA7 = blockG, blockI, blockD, blockB, blockL, mossy, nether, soul, web
optBuildA8 = oreG, oreI, oreC, oreD, oreR, oreY, oreL, repeater, torchR
optBuildA9 = doorW, doorI, switch, red, plateS, plateW, button, dispenser, note
optBuildB1 = ladder, tracks, fence, stairC, stairW, sign, half, double, picture
optBuildB2 = pickD, cart, boat, saddle, tnt, cake, bed, bonemeal, vines
optBuildB3 = halfSand, halfWood, halfCobble, halfBrick, halfBrickS, saplingNormal, saplingPine, saplingBirch, bonemeal
optBuildB4 = red, cart, tracks, railDetect, railPowered, bars, stoneBrick
optBuildB5 = doorTrap, gate, piston, pistonSticky, window, stairB, stairS, seedsPumpkin, seedsMelon
optBuildB6 = cageChicken, cageSilverfish, cagePig, cageSheep, cageCow, cageWolf, cageSquid, smoothSF
optBuildB7 = cageZombie, cageSkelly, cageCreeper, cageSpider, cageCavespider, cageSlimes, cagePigzombie, cageEnderman, cageGhast
optBuildB8 = arrow, compass, glass, appleG, swordD, bow, shovelD, pickD, torch
optBuildB9 = bucketW, watch, glass, appleG, swordD, bow, shovelD, pickD, torch
# Tag shown when build mode is activated.
tagBuildEnabled = builder
# ==================== compass mod - aka. Compass ============================
# Uncomment to enable mod:
#modCompassEnabled = yes
# Creates an alternate spawn location and makes it current.
keyCompassSet = INSERT
# Toggles between original and alternate spawn location.
keyCompassToggle = HOME
# Show player world coordinates.
optCompassShowPos = yes
# Tag shown when alternate spawn is current.
tagCompassAlternate = altSpawn
# ==================== craft mod - aka. Craft All Key ========================
# Uncomment to enable mod:
#modCraftEnabled = yes
# Crafting will be done as many times as possible while holding this key down
keyCraftAll = LSHIFT
# ==================== fly mod - aka. Flying =================================
# Uncomment to enable mod:
#modFlyEnabled = yes
# Turns fly mode on.
keyFlyOn =
# Turns fly mode off.
keyFlyOff =
# Toggles fly mode.
keyFlyToggle = F
# Fly up.
keyFlyUp = E
# Fly down.
keyFlyDown = Q
# Flying speed modifier key.
keyFlySpeed = LSHIFT
# Flying speed modifier is a toggle.
optFlySpeedIsToggle = no
# Running speed modifier key.
keyFlyRun = LSHIFT
# Running speed modifier is a toggle.
optFlyRunSpeedIsToggle= no
# Toggle NoClip mode.
keyFlyNoClip = F6
# Whether NoClip mode is enabled by default.
optFlyNoClip = no
# Running speed multiplier with speed modifier. [0.1 .. 10.0]]
optFlyRunSpeedMul = 1.5
# Vertical speed multiplier with run speed modifier (ladders & water). [0.1 .. 10.0]
optFlyRunSpeedVMul = 1.5
# Vertical movement speed. [0.1 .. 1.0]
optFlySpeedVertical = 0.2
# Movement speed multiplier. [0.1 .. 10.0]
optFlySpeedMulNormal = 1.0
# Movement speed multiplier with speed modifier. [0.1 .. 10.0]
optFlySpeedMulModifier= 4.0
# Jump speed multiplier. [1.0 .. 10.0]
optFlyJump = 1.0
# Jump speed multiplier while running. [1.0 .. 100.0]
# NB! Speed is not the same as height. For example: 1.25 is enough to get over a fence (height 1.5).
optFlyJumpHigh = 1.25
# Tag shown when fly mode is active.
tagFly = flying
# Tag shown when no clip mode is active.
tagFlyNoClip = noclip
# ==================== path mod - aka. Path Tracker ==========================
# Uncomment to enable mod:
#modPathEnabled = yes
# Show / hide path (BACK is aka BACKSPACE).
keyPathShow = BACK
# Delete path.
keyPathDelete = DELETE
# Max count of pathpoints remembered. [256 .. 32768]
optPathPoints = 8192
# Spacing of path - 0 means no spaces and therefore no animation. [0 .. 32]
optPathSpacing = 6
# Minimum length of path node. [0.1 .. 4.0]
optPathMin = 0.25
# Path animation speed. [0.0 .. 32.0]
optPathAnimSpeed = 8.0
# Path color.
optPathColor = LightRed
# Is path shown at startup.
optPathShow = no
# ==================== sun mod - aka. Sun Control ============================
# Uncomment to enable mod:
#modSunEnabled = yes
# Adds time.
keySunTimeAdd = ADD
# Subtracts time.
keySunTimeSub = SUBTRACT
# Modifier to change real time (hold down and press keySunTimeAdd or keySunTimeSub).
# NB! You need to be an OP in the SMP server for it to accept your changes.
# NB! The command works in SP too - despite what the command name might suggest.
keySunServer = LSHIFT
# Server command for adjusting time (command & whether to use '+' sign when adding positive time).
optSunServerCmd = /time add
optSunServerCmdPlus = no
# Stops time.
keySunStop = END
# Normalizes and resumes time.
keySunTimeNormal = EQUALS
# Time in seconds to add/subtract per keypress. [1 .. 600]
optSunTimeStep = 30
# Tag in front of time offset.
tagSunTime = time
# ==================== wield mod - aka. Wield Key ============================
# Uncomment to enable mod:
#modWieldEnabled = yes
# Key to wield a weapon.
keyWield = R
# Wield bow first instead of sword.
optWieldBowFirst = no
# Show ammo (arrows) count.
optWieldShowAmmo = yes
# Text shown for ammo count.
tagWieldAmmo = Arrows :
# ==================== safe mod - aka. Critter Spawn Highlighter =============
# Uncomment to enable mod:
#modSafeEnabled = yes
# Show / hide non-spawn-safe spots.
keySafeShow = L
# Show spot safety in midday.
optSafeShowWithSun = yes
# Color for markers that indicate spots with spawn-danger.
optSafeDangerColor = LightRed
# Color for markers that indicate spots with spawn-danger at night.
optSafeDangerColorSun = 0xdddd00
# Tag shown when showing non-spawn-safe spots.
tagSafe = safe
# ==================== recipe mod - aka. Custom Crafting Recipies ============
# Uncomment to enable mod:
#modRecipeEnabled = yes
# NB! Recipes are defined in recipes.txt - there are also the instructions.
# Show id of the item currently selected - useful for adding recipes to new items.
optRecipeShowId = yes
# Show what recipes could be used with the items on crafting grid.
optRecipeShowHelp = yes
# Option to preserve the vanilla recipeset for SMP.
optRecipeVanillaMP = no
# Dumps all recipes to log file after loading recipes.txt - debug tool mostly.
optRecipeDump = no
# ==================== boom mod - aka. Explosion Damage Control ==============
# Uncomment to enable mod:
#modBoomEnabled = yes
# Precentage chance of dropping the destroyed block if it is not an ore. [0 .. 100]
optBoomDropChance = 30
# Precentage chance of dropping the destroyed block if it is an ore. [0 .. 100]
optBoomDropOreChance = 100
# Explosion force scaling. [0.1 .. 10.0]
optBoomScaleTNT = 1.0
# Explosion force scaling. [0.1 .. 10.0]
optBoomScaleCreeper = 1.0
# Explosion force scaling. [0.1 .. 10.0]
optBoomScaleFireball = 0.99
# Creeper explosion safety range. [-1 .. 32]
# If there are non-natural blocks in the range then the explosion will not destroy any blocks.
# -1 means infinite range => creeper explosions will not destroy any block anywhere.
# 0 means that creeper explosions work as in vanilla game.
optBoomSafeRange = 16
# ==================== spawn mod - aka. Critter Spawn Control ================
# Uncomment to enable mod:
#modSpawnEnabled = yes
# Support all other mods that add critters - aka apply the same spawning rules to all of them.
optSpawnSupportMods = yes
# Limit where critters are allowed to spawn.
# Note: optSpawnAllowInNonAir prevents critters from spawning in things like: reed, flowers, signs, buttons, etc
# - but not in water altough the option name might give the impression.
optSpawnAllowInNonAir = no
optSpawnAllowOnNonNatural = no
optSpawnAllowOnGrass = yes
optSpawnAllowOnCobble = yes
optSpawnAllowOnSand = yes
optSpawnAllowOnGravel = yes
optSpawnAllowOnTree = no
optSpawnAllowOnSandstone= no
# Reduces named spawned critters by precentage. [0 .. 100]
# 100, essentially removes the critter from game.
optSpawnPigReduction = 75
optSpawnChickenReduction = 25
optSpawnCowReduction = 0
optSpawnSheepReduction = 0
optSpawnSquidReduction = 0
optSpawnWolfReduction = 0
optSpawnSpiderReduction = 0
optSpawnSkeletonReduction = 0
optSpawnCreeperReduction = 0
optSpawnZombieReduction = 0
optSpawnSlimeReduction = 0
optSpawnGhastReduction = 0
optSpawnPigZombieReduction = 0
optSpawnCaveSpiderReduction = 0
optSpawnEndermanReduction = 0
optSpawnSilverfishReduction = 0
# ==================== ore mod - aka. Ore Redistribution =====================
# WARNING: This mod will alter your savegame! Make a backup before using this!
# Uncomment to enable mod:
#modOreEnabled = yes
# Use lava instead of smoothstone for flattening the bedrock.
optOreLavaFloor = yes
# Ore redistribution rules. One to many rules separated by spaces. Every rule consists of:
# chunkChance/maxHeight/minHeight/attempts/size/belowWhat
# chunkChance - precentage chance that the rule is used in a chunk (16x16 column of earth)
# maxHeight - max height where rule applies
# minHeight - min height where rule applies
# attempts - how many times a start of ore vein is being attempted
# size - max size of vein
# belowWhat - below what block the vein must start (using block id: 1=smoothstone, 11=lava)
optOreCoalRule = 75/80/48/8/16/1 10/120/32/128/4/1 5/120/64/1/128/1
optOreIronRule = 100/80/16/8/16/1 100/96/8/16/8/1 5/120/64/128/1/1
optOreGoldRule = 50/32/4/4/16/1 5/96/8/8/64/1
optOreBlueRule = 100/32/8/2/8/1 5/56/48/64/2/1 5/96/48/1/32/1
optOreRedRule = 100/32/8/2/8/1 10/120/96/64/1/1
optOreDiamondRule = 75/16/4/2/8/1 100/32/2/128/2/11 10/120/16/2/8/1
# ==================== teleport mod - aka. Teleportation =====================
# Uncomment to enable mod:
#modTeleportEnabled = yes
# For teleportation pad to work - there bust be a sign (on stick or on wall) above it (0-1 blocks).
# On sign, use on a separate line for teleport target area: "!x,y,z" - use "compass" mod
# provided here or some other means to get the coordinates.
# You can also limit the teleport to one specific item type by writing on a separate line: "?item-or-mob-name"
# Item and mob names are defined in file names.txt.
# NB! There currently is no teleportation target area checks - use sensibly.
# Teleport pad block for item teleportation (NB! must be solid block).
optTeleportItem = blockI
# Teleport pad block for player teleportation (NB! must be solid block).
optTeleportPlayer = blockG
# Teleport pad block for critter teleportation (NB! must be solid block).
optTeleportCritter = blockD
# The following teleportation methods do not utilize teleportation pads and can be used anywhere.
# NB! Note that with default config it will consume redstone dust and you need to hold them in hand to teleport.
# NB! All teleportations should be always safe (it tries to prevent teleporting above/in lava/fire, cactuses, too high above hround, into walls).
# NB! There must be 3m of vertical space in the destination to teleport.
# NB! Some of the safety checks are disabled if you teleport to cursor when fly mode is enabled.
# Safe vertical teleport: up. "PRIOR" is usually "Page Up" on keyboard.
keyTeleportUp = PRIOR
# Safe vertical teleport: down. "NEXT" is usually "Page Down" on keyboard.
keyTeleportDown = NEXT
# Teleport to where the cursor points.
keyTeleportCursor = RIGHT
# Resource that is used to teleport.
# NB! Using "0" (zero) - means that no item is required to teleport.
optTeleportUseItem = R
# Teleport only if the required item is selected (yes - to prevent it being TOO convenient to escape out of harms way).
optTeleportIsSelected = yes
# ==================== cheat mod - aka. Cheat ================================
# Uncomment to enable mod:
#modCheatEnabled = yes
# Toggles cheat mode on / off.
keyCheat = Y
# Show / hide monsters.
keyCheatShowMobs = M
# Show / hide ores.
keyCheatShowOres = O
# Toggles highlighting mode on / off.
keyCheatHighlight = H
# Removes all fires in ~16 block radius.
keyCheatRemoveFire = N
# Change view to anything living where you point at. Press again to switch back to yourself.
keyCheatView = NUMPAD5
# See through everything nearby (ie walls and other obstructions).
keyCheatSee = I
# Set the key for seeing trough things to function as a toggle.
optCheatSeeIsToggle = no
# Distance in meters to see through. [1.0..32.0]
optCheatSeeDist = 4.0
# Specify what is shown as ore and with what color.
# Syntax: comma separated ore and color pairs, ie "ore/color, ore/color" etc
optCheatShowOres = oreI/0xff6600, clay/Cyan, oreG/0xffee00, oreD/LightCyan, mossy/LightGreen, oreL/LightBlue, oreR/LightRed, cage/LightMagenta, oreC/DarkWhite, smoothSF/DarkRed
# Ore detection horizontal / vertical range. [4 .. 128]
# NB! max markers shown is 4096
optCheatShowOresRangeH= 16
optCheatShowOresRangeV= 64
# Specify what is shown as monter and with what color.
optCheatShowMobs = Other/0x888888, Player/0x0000ff, Spider/0xff6666, Cavespider/0xff8866, Skelly/0xffffff, Creeper/0x66ff66, Zombie/0xffff66, Slimes/0xff66ff, Silverfish/0x66ffff, Ghast/0xffffff, LavaSlime/0xff6666, Blaze/0xffff66, Pigzombie/0x882200, Wolf/0x880088, Enderman/0x008800, Squid/0x000088, Cow/0x554400, Sheep/0x888888, Pig/0x884400, Chicken/0x999966, MushroomCow/0x880000, Villager/0x008888, SnowMan/0x666688
# Range at which to show mobs (0 = unlimited) [0 .. 256]
optCheatShowMobsRange = 0
# Show mob size by adjusting the height of the lines marking their location. Makes it harder to judge distance tho.
optCheatShowMobsSize = no
# Allow fall damage.
optCheatFallDamage = yes
# Toggle health cheat (optCheatRestoreHealth).
keyCheatHealth =
# Keep the player alive.
optCheatRestoreHealth = no
# Infinite arrows.
optCheatInfArrows = no
# Armors have infinite durability.
optCheatInfArmor = no
# Swords have infinite durability.
optCheatInfSword = no
# Tools have infinite durability.
optCheatInfTools = no
# Player is immune to fire.
optCheatFireImmune = no
# Player does not need air.
optCheatNoAir = no
# Show health bars for living creatures.
optCheatShowHealth = yes
# Tag shown when cheat mode is active.
tagCheater = cheater
# ==================== resize mod - aka. Critter size variety ================
# Uncomment to enable mod:
#modResizeEnabled = yes
# Percentage chance for smaller than usual critter. [0..100]
optResizeCowSmall = 30
optResizeSpiderSmall = 50
optResizeSheepSmall = 30
optResizeSkellySmall = 10
optResizeZombieSmall = 30
optResizePigSmall = 50
# Percentage chance for bigger than usual critter. [0..100]
optResizeCowBig = 10
optResizeSpiderBig = 10
optResizeSheepBig = 10
optResizeSkellyBig = 20
optResizeZombieBig = 20
optResizePigBig = 10
# ==================== furnace mod - aka. Custom Smelting Recipes ============
# Uncomment to enable mod:
#modFurnaceEnabled = yes
# How many units of time is wooden item worth if not told otherwise [1..32767]
optFurnaceWoodFuel = 300
# If current item burning in furnace has a fuel value at least this high then the fuel will never run out. [1..32767]
# For example: Set this to 20000 for lava buckets to provide infinite fuel.
optFurnaceInfiniteFuel= 32767
# Specifies how much time one smelting takes. [1..1000]
# NB! 20 units of time is equal to one second.
optFurnaceSmeltingTime= 200
# Allow fuel waste.
optFurnaceFuelWaste = yes
# Return empty bucket when using lava bucket.
optFurnaceReturnBucket = no
# ==================== dig mod - aka. Digging Speed Adjustment ===============
# Uncomment to enable mod:
#modDigEnabled = yes
# Digging speed multiplier. [0.1..10.0]
optDigSpeed = 2.0
# Distance where one can dig / place blocks (vanilla game has it at 4.0). [2.0 .. 128.0]
optDigReach = 6.0
# Always harvest blocks without needing proper tools.
# NB! "build" mod's harvesting setting takes precedence if enabled.
optDigHarvestAlways = false
# ==================== weather mod - aka. Weather Control ====================
# Uncomment to enable mod:
#modWeatherEnabled = yes
# Used to call rain / end of rain.
keyWeatherRain = J
# Used to call thunderstorm / end of thunder.
keyWeatherThunderstorm = K
# Used to call a lightning strike to where you are pointing. (You might want to use CAPITAL, aka CapsLock, instead)
keyWeatherLightning = U
# When used with conjunction of calling a thunderstorm - maximizes thunder frequency.
keyWeatherMayhem = LSHIFT
# Prvents all natural changes to weather (ie. if it does not rain then it will never start on its own).
optWeatherLocked = no
# Removes the rain effect from game - while leaving the rest intact (sound / light / water-particles on ground).
optWeatherNoDraw = no
# NB! You get actual thunder only when it is raining at the same time.
# 1 in x chance for thunder in thunderstorm. [1 .. 500000]
# (chance for thunder per chunk is 20*1/x)
optWeatherThunderChance = 100000
# 1 in x chance for thunder in thunderstorm when mayhem mode is active [1 .. 10000]
optWeatherThunderMayhemChance = 2000
# Rain duration in seconds. [10 .. 3600]
optWeatherRainTime = 180 .. 600
# Pause between rain in seconds. [10 .. 14400]
optWeatherNoRainTime = 600 .. 8400
# Thunderstorm duration in seconds. [10 .. 3600]
optWeatherThunderTime = 180 .. 600
# Pause between thunderstorms in seconds. [10 .. 14400]
optWeatherNoThunderTime = 600 .. 8400
# Weather tags.
tagWeatherRaining = raining
tagWeatherThundering = thunder
tagWeatherMayhem = mayhem
# ==================== growth mod - aka. Plant Growth ========================
# Uncomment to enable mod:
#modGrowthEnabled = yes
# Chance to spread to adjacent dirt block (not grass!), 1 in x. [1..1000]
# NB! a chance value of 1000 will disable spreading.
optGrowthFlower = 15
optGrowthShroom = 50
optGrowthPumpkin = 30
optGrowthSappling = 20
optGrowthReed = 10
# Do the sappling root themselves.
optGrowthRooting = yes
# Do the seeds plant themselves.
optGrowthPlanting = yes
# Do not root if there is a sappling or trunk in radius. [1..5]
optGrowthRootingSpace = 3
# Time when sapplings root themselves (if on the ground at that time) in seconds. [5..300]
# NB! in addition to this option - they will always try to root themselves just before despawning.
optGrowthRootingTime = 10
# ==================== chest mod - aka. Autostore ============================
# Uncomment to enable mod:
#modChestEnabled = yes
# Autostore items on top of chests.
optChestStore = yes
# Items on this block will be autostored in best matching chest in radius.
optChestStoreBlock = bench
# Radius to search for best matching chest. [0..8]
# NB! radius of 0 disables search.
optChestStoreRadius = 2
# ==================== icon mod - aka. Container Content Icons ===============
# Uncomment to enable mod:
#modIconEnabled = yes
# Show on chest the item icon of the first item in it.
optIconShowChest = yes
# Show on dispenser the item icon of the first item in it.
optIconShowDispenser = yes
# Show on furnace the item icons of fuel, input and output.
optIconShowFurnace = yes
# Send a message to server telling that we can handle custom packets.
optIconMP = no
# ==================== info mod - aka. World Information =====================
# Uncomment to enable mod:
#modInfoEnabled = yes
# Key to show / hide info.
keyInfoToggle = F12
# Key to show / hide list of players nearby.
keyInfoPlayersToggle = F4
# Shows your current coordinates on top of the screen.
optInfoShowPos = yes
# Shows current time on top of the screen.
optInfoShowTime = yes
# Shows the name of the biome you are in on top of the screen.
optInfoShowBiome = no
# In-game time offset (in seconds) as the new world begins at 0:00 which is actually morning.
optInfoTimeOffset = 300
# Show critter health at all times.
optInfoShowHealth = no
# Disable the obnoxious achivement pop-ups.
optInfoHideAchievement= no
# Show info for item in hand
optInfoShowItem = yes
# Max range for players to be show on keyInfoPlayersToggle list. [10.0 .. 1000.0]
optInfoRangeMax = 10.0
# Players termed to be near in keyInfoPlayersToggle list. [1.0 .. 1000.0]
optInfoRangeNear = 50.0
# Color code prefix for players nearby.
optInfoPrefixNear = ?
# Color code prefix for the rest.
optInfoPrefixFar = ?
# ==================== death mod - aka. Death Behavior =======================
# Uncomment to enable mod:
#modDeathEnabled = yes
# Drop player inventory on death.
optDeathDropInv = no
# Lose experiene on death.
optDeathLoseExp = no
# Health penalty on respawn. [0 .. 100]
# NB! Max HP in vanilla game is 20 and it is quaranteed that you spawn with at least 1 HP.
optDeathHPPenalty = 0
# ==================== item mod - aka. Item/Block Properties =================
# Uncomment to enable mod:
#modItemEnabled = yes
# NB! Properties are defined in items.txt - there are also the instructions.
# Enable special changes for fence block: allows placement on top of other fence blocks and in midair.
optItemChangeFence = yes
# Enable special changes for glass block: block can be harvested.
optItemChangeGlass = yes
# Enable special changes for bookshelves block: block can be harvested.
optItemChangeShelf = yes
# Enable special changes for ice block: block can be harvested.
optItemChangeIce = yes
# Enable special changes for farmland block: no decay from walking on it.
optItemChangeFarmland = yes
# Enable special changes for sponge block: eats all horizontally adjecent water source blocks - WARNING: infinite range!
optItemChangeSponge = no
# Enable special changes for water block: spawn source block when there are at least two source blocks at its sides - regardless of what is below it.
optItemChangeWater = no
# Enable special changes for lava block: spawn source block when there are at least two source blocks at its sides - regardless of what is below it.
optItemChangeLava = no
# Enable special changes for mod-spawner block: block can be harvested (does not produce anything when placed - look in "recipe" mods recipes.txt file for ways to make something useful out of it).
optItemChangeSpawner = yes
# Enable special changes for leaves block (following options).
optItemChangeLeaves = yes
# 1 in x chance for destroyed leaves block to drop something. [1..100]
optItemLeavesDrop = 20
# Precentage chance for oak tree leaves to drop the special item. [0..100]
optItemOakChance = 3
optItemOakSpecial = apple
# Precentage chance for birch tree leaves to drop the special item. [0..100]
optItemBirchChance = 1
optItemBirchSpecial = egg
# Precentage chance for pine tree leaves to drop the special item. [0..100]
optItemPineChance = 5
optItemPineSpecial = cocobean
# Dumps all items to log file before without changes from items.txt - debug tool mostly.
optItemDump = no

复制代码

假如我要开启飞行的功能我就要找到飞行的代码进行更改一下就是飞行代码接下来教你怎么改

# ==================== fly mod - aka. Flying =================================
# Uncomment to enable mod:
#modFlyEnabled = yes
# Turns fly mode on.
keyFlyOn =
# Turns fly mode off.
keyFlyOff =
# Toggles fly mode.
keyFlyToggle = F
# Fly up.
keyFlyUp = E
# Fly down.
keyFlyDown = Q
# Flying speed modifier key.
keyFlySpeed = LSHIFT
# Flying speed modifier is a toggle.
optFlySpeedIsToggle = no
# Running speed modifier key.
keyFlyRun = LSHIFT
# Running speed modifier is a toggle.
optFlyRunSpeedIsToggle= no
# Toggle NoClip mode.
keyFlyNoClip = F6
# Whether NoClip mode is enabled by default.
optFlyNoClip = no
# Running speed multiplier with speed modifier. [0.1 .. 10.0]]
optFlyRunSpeedMul = 1.5
# Vertical speed multiplier with run speed modifier (ladders & water). [0.1 .. 10.0]
optFlyRunSpeedVMul = 1.5
# Vertical movement speed. [0.1 .. 1.0]
optFlySpeedVertical = 0.2
# Movement speed multiplier. [0.1 .. 10.0]
optFlySpeedMulNormal = 1.0
# Movement speed multiplier with speed modifier. [0.1 .. 10.0]
optFlySpeedMulModifier= 4.0
# Jump speed multiplier. [1.0 .. 10.0]
optFlyJump = 1.0
# Jump speed multiplier while running. [1.0 .. 100.0]
# NB! Speed is not the same as height. For example: 1.25 is enough to get over a fence (height 1.5).
optFlyJumpHigh = 1.25
# Tag shown when fly mode is active.
tagFly = flying
# Tag shown when no clip mode is active.
tagFlyNoClip = noclip
# ==================== path mod - aka. Path Tracker ==========================
# Uncomment to enable mod:
#modPathEnabled = yes
# Show / hide path (BACK is aka BACKSPACE).
keyPathShow = BACK
# Delete path.
keyPathDelete = DELETE
# Max count of pathpoints remembered. [256 .. 32768]
optPathPoints = 8192
# Spacing of path - 0 means no spaces and therefore no animation. [0 .. 32]
optPathSpacing = 6
# Minimum length of path node. [0.1 .. 4.0]
optPathMin = 0.25
# Path animation speed. [0.0 .. 32.0]
optPathAnimSpeed = 8.0
# Path color.
optPathColor = LightRed
# Is path shown at startup.
optPathShow = no

复制代码

把全部的字前面的“#”号拿掉保存文本就完成可以进行游戏了
改过的：

==================== fly mod - aka. Flying =================================
Uncomment to enable mod:
modFlyEnabled = yes
Turns fly mode on.
keyFlyOn =
Turns fly mode off.
keyFlyOff =
Toggles fly mode.
keyFlyToggle = F
Fly up.
keyFlyUp = E
Fly down.
keyFlyDown = Q
Flying speed modifier key.
keyFlySpeed = LSHIFT
Flying speed modifier is a toggle.
optFlySpeedIsToggle = no
Running speed modifier key.
keyFlyRun = LSHIFT
Running speed modifier is a toggle.
optFlyRunSpeedIsToggle= no
Toggle NoClip mode.
keyFlyNoClip = F6
Whether NoClip mode is enabled by default.
optFlyNoClip = no
Running speed multiplier with speed modifier. [0.1 .. 10.0]]
optFlyRunSpeedMul = 1.5
Vertical speed multiplier with run speed modifier (ladders & water). [0.1 .. 10.0]
optFlyRunSpeedVMul = 1.5
Vertical movement speed. [0.1 .. 1.0]
optFlySpeedVertical = 0.2
Movement speed multiplier. [0.1 .. 10.0]
optFlySpeedMulNormal = 1.0
Movement speed multiplier with speed modifier. [0.1 .. 10.0]
optFlySpeedMulModifier= 4.0
Jump speed multiplier. [1.0 .. 10.0]
optFlyJump = 1.0
Jump speed multiplier while running. [1.0 .. 100.0]
NB! Speed is not the same as height. For example: 1.25 is enough to get over a fence (height 1.5).
optFlyJumpHigh = 1.25
Tag shown when fly mode is active.
tagFly = fly
Tag shown when no clip mode is active.
tagFlyNoClip = noclip