领地插件怎么设置管理员和腐竹的领地，我设置玩家的领地是3块领地，而管理员也变成了3块领地，怎么设置管理员能圈无限。
这个问题问的好，老朽也研究了一会，在residence的config文件夹中，有一段设置是这样的：
Groups:
Default: #group name
# Information about the Residence zone that the player can define.
#Uncomment the lines below to mirror this config to other groups.
#Mirror:
#- 'group1'
#- 'group2'
Residence:
# Determins if this group can create residences or not. This option can be overriden with the permissions node 'residence.create'
CanCreate: true
# The maximum number of Residences a player can have.
MaxResidences: 3
# The maximum number of physical areas a residence can have.
MaxAreasPerResidence: 2
# The maximum number of blocks a Residence can be, East to West (X).
MaxEastWest: 16
# The maximum number of blocks a Residence can be, North to South (Z).
MaxNorthSouth: 16
# The maximum number of blocks a Residence can be, High to Low (Y).
MaxUpDown: 256
# The lowest altitude this group is allowed to protect.
MinHeight: 0
# The highest altitude this group is allowed to protect.
MaxHeight: 255
# The maximum recursive depth that subzones can go.
# A subzone within a subzone within the Residence zone would be a depth of 2.
# Set to 0 to disable subzones.
SubzoneDepth: 3
# Whether or not to allow teleporting to Residences.
CanTeleport: false
# Allow or Disallow the use of /res unstuck, to get yourself out of a residence if stuck in one somehow
Unstuck: true
# Allow or Disallow the use of the /res select command, if disabled they can only use the selection tool.
SelectCommandAccess: true
# Allow or Disallow the group to access the Blacklist/Ignorelist for residences they own.
ItemListAccess: true
# Options relating to enter and leave messages on the residence.
Messaging:
# Whether or not the player can change the Residence enter and leave messages.
CanChange: true
# The default enter message to apply to new Residences created by players in this group.
# Leaving the message blank will disable it.
DefaultEnter: Welcome %player to %residence, owned by %owner.
# The default leave message to apply to new Residences created by players in this group.
# Leaving the message blank will disable it.
DefaultLeave: Now leaving %residence.
# Options relating to the Lease system.
Lease:
# The maximum number of days to allow leases.
MaxDays: 16
# The number of days to add to the lease following a '/res lease renew' command.
RenewIncrement: 14
#Options related to the rent system
Rent:
#determines how many residences can be rented by players of this group at once
MaxRents: 3
#determines how many residences can be set for rent by players of this group at once
MaxRentables: 3
# Options relating to the Residence Economy.
Economy:
# Whether or not players in this group can buy other Residences that are for sale.
CanBuy: true
# Whether or not players in this group can sell their Residences.
CanSell: true
# Whether or not to ignore the Residence size/count limits when buying a residence.
IgnoreLimits: false
# The cost, per block, of making a new Residence or adding a area to it.
BuyCost: 50
# The cost, per block, of renewing a Residence lease (if the lease system is enabled).
RenewCost: 0.1
# Flags are checked in the order:
# 1: Player
# 2: Group
# 3: Owner
# 4: If all others are undefined, reverts to default value (usually true).
# Flag permissions default to false.
# These flags settings override the globals.
Flags:
# Specifically allow or deny this group from changing certain flags.
Permission:
#build: true
# Specifys the flags that are applied at residence creation for players of this group.
Default:
#build: true
# Specifys the flags that are applied at to the creator at residence creation.
CreatorDefault:
#build: true
# Specifys the flags that are applied to other groups for this residence, at creation.
GroupDefault:
#default: #group name
#build: false
#these flags are applied specifically to this group whenever they are outside a residence
#these flags will override the flags at the top, under the Global section.
World:
Global: #these flags will apply to all worlds
#build: false
WorldNameHere: #or you can apply them by each individual world
#build: false
# You can manually specify the group a player is in below, this overrides their permissions group.
这就是默认组别的权限设置，你可以在下面加一个你需要组别的名字，按照他的格式再写一段，把你需要改变的权限都改了，当然，也包括您说的领地数量（MaxResidences）
Groups:
Default: #group name
# Information about the Residence zone that the player can define.
#Uncomment the lines below to mirror this config to other groups.
#Mirror:
#- 'group1'
#- 'group2'
Residence:
# Determins if this group can create residences or not. This option can be overriden with the permissions node 'residence.create'
CanCreate: true
# The maximum number of Residences a player can have.
MaxResidences: 3
# The maximum number of physical areas a residence can have.
MaxAreasPerResidence: 2
# The maximum number of blocks a Residence can be, East to West (X).
MaxEastWest: 16
# The maximum number of blocks a Residence can be, North to South (Z).
MaxNorthSouth: 16
# The maximum number of blocks a Residence can be, High to Low (Y).
MaxUpDown: 256
# The lowest altitude this group is allowed to protect.
MinHeight: 0
# The highest altitude this group is allowed to protect.
MaxHeight: 255
# The maximum recursive depth that subzones can go.
# A subzone within a subzone within the Residence zone would be a depth of 2.
# Set to 0 to disable subzones.
SubzoneDepth: 3
# Whether or not to allow teleporting to Residences.
CanTeleport: false
# Allow or Disallow the use of /res unstuck, to get yourself out of a residence if stuck in one somehow
Unstuck: true
# Allow or Disallow the use of the /res select command, if disabled they can only use the selection tool.
SelectCommandAccess: true
# Allow or Disallow the group to access the Blacklist/Ignorelist for residences they own.
ItemListAccess: true
# Options relating to enter and leave messages on the residence.
Messaging:
# Whether or not the player can change the Residence enter and leave messages.
CanChange: true
# The default enter message to apply to new Residences created by players in this group.
# Leaving the message blank will disable it.
DefaultEnter: Welcome %player to %residence, owned by %owner.
# The default leave message to apply to new Residences created by players in this group.
# Leaving the message blank will disable it.
DefaultLeave: Now leaving %residence.
# Options relating to the Lease system.
Lease:
# The maximum number of days to allow leases.
MaxDays: 16
# The number of days to add to the lease following a '/res lease renew' command.
RenewIncrement: 14
#Options related to the rent system
Rent:
#determines how many residences can be rented by players of this group at once
MaxRents: 3
#determines how many residences can be set for rent by players of this group at once
MaxRentables: 3
# Options relating to the Residence Economy.
Economy:
# Whether or not players in this group can buy other Residences that are for sale.
CanBuy: true
# Whether or not players in this group can sell their Residences.
CanSell: true
# Whether or not to ignore the Residence size/count limits when buying a residence.
IgnoreLimits: false
# The cost, per block, of making a new Residence or adding a area to it.
BuyCost: 50
# The cost, per block, of renewing a Residence lease (if the lease system is enabled).
RenewCost: 0.1
# Flags are checked in the order:
# 1: Player
# 2: Group
# 3: Owner
# 4: If all others are undefined, reverts to default value (usually true).
# Flag permissions default to false.
# These flags settings override the globals.
Flags:
# Specifically allow or deny this group from changing certain flags.
Permission:
#build: true
# Specifys the flags that are applied at residence creation for players of this group.
Default:
#build: true
# Specifys the flags that are applied at to the creator at residence creation.
CreatorDefault:
#build: true
# Specifys the flags that are applied to other groups for this residence, at creation.
GroupDefault:
#default: #group name
#build: false
#these flags are applied specifically to this group whenever they are outside a residence
#these flags will override the flags at the top, under the Global section.
World:
Global: #these flags will apply to all worlds
#build: false
WorldNameHere: #or you can apply them by each individual world
#build: false
# You can manually specify the group a player is in below, this overrides their permissions group.
这就是默认组别的权限设置，你可以在下面加一个你需要组别的名字，按照他的格式再写一段，把你需要改变的权限都改了，当然，也包括您说的领地数量（MaxResidences）
大兴 发表于 2013-3-13 12:41
这个问题问的好，老朽也研究了一会，在residence的config文件夹中，有一段设置是这样的：
Groups:
De ...
哦，谢谢。
大兴 发表于 2013-3-12 22:10
这个问题问的好，老朽也研究了一会，在residence的config文件夹中，有一段设置是这样的：
Groups:
De ...
我想设置个VIP权限组。。
VIP权限：领地数量：5个
领地大小：100*100*100
创建领地每格的花费：0.5元
一次可以租用3个领地
一次可以出租3个领地
出租每个方块的话费：0.3元
可出租的最大天数：30
输入指令后续租5天
大兴 发表于 2013-3-12 22:10
这个问题问的好，老朽也研究了一会，在residence的config文件夹中，有一段设置是这样的：
Groups:
De ...
http://pan.baidu.com/share/link? ... 1&uk=3037738695 别的我都设置好了的，请大神帮忙
a372403923 发表于 2013-8-6 16:37
http://pan.baidu.com/share/link?shareid=1110840071&uk=3037738695 别的我都设置好了的，请大神帮忙
怎么说也另开一帖，在别人打完的帖子里答像什么话