我服务器的vip组不能圈地说无权限
明显是vip组缺少 可是我不知道权限
还有就是config配置文件里我设置普通玩家的为50*50*256如何给vip组弄成100*100*256的
还有就是哪一项是设置玩家领地上限的
同样我也要给vip组多加几个领地上限
求解啊
明显是vip组缺少 可是我不知道权限
还有就是config配置文件里我设置普通玩家的为50*50*256如何给vip组弄成100*100*256的
还有就是哪一项是设置玩家领地上限的
同样我也要给vip组多加几个领地上限
求解啊
圈地权限:
residence.select
residence.create
不同组不同领地属性,请参考该主题中相关参考链接:http://www.mcbbs.net/thread-379094-1-1.html
residence.select
residence.create
不同组不同领地属性,请参考该主题中相关参考链接:http://www.mcbbs.net/thread-379094-1-1.html
- Residence:
- # Determins if this group can create residences or not. This option can be overriden with the permissions node 'residence.create'
- CanCreate: true 给予组的创建权限
- # The maximum number of Residences a player can have.
- MaxResidences: 3 领地的数量上限
我有两个组怎么弄
网络摆渡客 发表于 2015-1-19 23:19
圈地权限:
residence.select
residence.create
你那个都没教哪个是改什么的
haixing 发表于 2015-1-20 12:48
你那个都没教哪个是改什么的
那个里面教你领地分组了,你看了吗?
如果看了,注意这些地方:
- Groups:
- Default: #group name
- # Information about the Residence zone that the player can define.
- #Uncomment the lines below to mirror this config to other groups.
- #Mirror:
- #- 'group1'
- #- 'group2'
- Residence:
- # Determins if this group can create residences or not. This option can be overriden with the permissions node 'residence.create'
- CanCreate: true
- # The maximum number of Residences a player can have.
- MaxResidences: 10 #一个玩家可以拥有的最多领地个数
- # The maximum number of physical areas a residence can have.
- MaxAreasPerResidence: 10
- # The maximum number of blocks a Residence can be, East to West (X).
- MaxEastWest: 100 #由东到西最大距离
- # The maximum number of blocks a Residence can be, North to South (Z).
- MaxNorthSouth: 100 #由北到南最大距离
- # The maximum number of blocks a Residence can be, High to Low (Y).
- MaxUpDown: 256
- # The lowest altitude this group is allowed to protect.
- MinHeight: 0
- # The highest altitude this group is allowed to protect.
- MaxHeight: 255
网络摆渡客 发表于 2015-1-20 12:55
那个里面教你领地分组了,你看了吗?
如果看了,注意这些地方:
是不是在MAxRe什么的下面回车加组名?,还有就是那个圈地大小该如何添加?
haixing 发表于 2015-1-20 13:26
是不是在MAxRe什么的下面回车加组名?,还有就是那个圈地大小该如何添加? ...
千万不要回车。
直接复制已有的Default组,改名成VIP组来修改。
网络摆渡客 发表于 2015-1-20 13:48
千万不要回车。
直接复制已有的Default组,改名成VIP组来修改。
从哪里开始复制,你发的全部都是么,是不是复制后然后粘贴到下面自己改组合设置
haixing 发表于 2015-1-20 18:54
从哪里开始复制,你发的全部都是么,是不是复制后然后粘贴到下面自己改组合设置 ...
属于一个组的内容缩进更多,如果你发现到某个地方相对于组名没有缩进了,就是到头了。
复制后粘贴到下面,该相应的地方就可以,如果你不确定,改好后发上来帮你看看
网络摆渡客 发表于 2015-1-20 19:09
属于一个组的内容缩进更多,如果你发现到某个地方相对于组名没有缩进了,就是到头了。
复制后粘贴到下面 ...
没听懂,能不能哪天有空叫你加个qq,让你帮我改改
网络摆渡客 发表于 2015-1-19 23:19
圈地权限:
residence.select
residence.create
还有就是大大,我加了那个res什么.createvip组还不能建领地
haixing 发表于 2015-1-20 20:21
还有就是大大,我加了那个res什么.createvip组还不能建领地
你是怎么添加的?能贴一下吗?