像素君吖 发表于 2023-8-12 19:55
可以试试不在开服的时候设置配置文件，而是关服的时候设置
我之前就是这样莫名其妙明明设置了却没 ...

不惹男男气 发表于 2023-8-12 19:58
设置多少比较合适呢？  现在 20人  我打算几分钟后重启

像素君吖 发表于 2023-8-12 20:00
我自己的配置的话，是300

           # 领地最大格数（东西方向）
           MaxEastWest: 256
           # 领地最小格数（东西方向），设为-1则不限制
           MinEastWest: 3
           # 领地最大格数（南北方向）
           MaxNorthSouth: 256
           # 领地最小格数（南北方向）
           MinNorthSouth: 3
           # 领地最大格数（高度）
           MaxUpDown: 256
           # 领地最小格数（高度），设为-1则不限制
           MinUpDown: 3
           # 可创建领地的最小高度
           MinHeight: 0
           # 可创建领地的最大高度

不惹男男气 发表于 2023-8-12 20:18
不清楚为什么是这样的 我设置问题吗

LangZong 发表于 2023-8-12 20:23
此配置文件翻译有误，Min前缀的配置设置错误
参考此翻译

像素君吖 发表于 2023-8-12 20:24
或许是你设置的太大了
           MaxResidences: 3
           # The maximum number of physical areas ...

不惹男男气 发表于 2023-8-12 20:28
我现在设置为这个 然后重载还是不行

不惹男男气 发表于 2023-8-12 20:28
我现在设置为这个 然后重载还是不行

# These groups correspond to the Permissions groups defined in your '<worldname>.yml'
Groups:
    Default: #group name, DONT remove this group
       # Information about the Residence zone that the player can define.
       #Uncomment the lines below to mirror this config to other groups.
       #Mirror:
         #- 'group1'
         #- 'group2'
       Residence:
           # Determins if this group can create residences or not.  This option can be overriden with the permissions node 'residence.create'
           CanCreate: true
           # The maximum number of Residences a player can have.
           MaxResidences: 10
           # The maximum number of physical areas a residence can have.
           MaxAreasPerResidence: 2
           # The maximum number of blocks a Residence can be, East to West (X).
           MaxEastWest: 100
           # (Optional) The minimum number of blocks a Residence can be, East to West (X).
           MinEastWest: -1
           # The maximum number of blocks a Residence can be, North to South (Z).
           MaxNorthSouth: 100
           # (Optional) The minimum number of blocks a Residence can be, North to South (Z).
           MinNorthSouth: -1
           # The maximum number of blocks a Residence can be, High to Low (Y).
           MaxUpDown: 320
           # (Optional) The minimum number of blocks a Residence can be, High to Low (Y).
           MinUpDown: -1
           # The lowest altitude this group is allowed to protect.
           MinHeight: -64
           # The highest altitude this group is allowed to protect.
           MaxHeight: 320
            # The maximum amount of subzones can current area have.
           MaxSubzonesInArea: 3
            # The maximum recursive depth that subzones can go.
            # A subzone within a subzone within the Residence zone would be a depth of 2.
            # Set to 0 to disable subzones.
           SubzoneDepth: 3
           # (Optional) The maximum number of blocks a Residence Subzone can be, East to West (X).
           SubzoneMaxEastWest: 16
           # (Optional) The minimum number of blocks a Residence Subzone can be, East to West (X).
           SubzoneMinEastWest: 3
           # (Optional) The maximum number of blocks a Residence Subzone can be, North to South (Z).
           SubzoneMaxNorthSouth: 16
           # (Optional) The minimum number of blocks a Residence Subzone can be, North to South (Z).
           SubzoneMinNorthSouth: 3
           # (Optional) The maximum number of blocks a Residence Subzone can be, High to Low (Y).
           SubzoneMaxUpDown: 320
           # (Optional) The minimum number of blocks a Residence Subzone can be, High to Low (Y).
           SubzoneMinUpDown: 3