求一个清理插件 - 联机问答

feishi_jin

本帖最后由 feishi_jin 于 2022-2-19 14:34 编辑

如题有没有清理插件能够支持有命名牌的怪物不清理啊我现在手上的清理插件不支持被命名了的怪物不清理服务器版本1.18.1

clearlag配置列表
config-version: 20

# -- 'use-internal-tps' Should clearlag just use the calculated internal TPS? (Improves accuracy)
# -- 'language' Clearlag supports multiple languages (https://github.com/bob7l/Clearlag-Languages) translated by the community
# -- 'use-internal-tps' Should Clearlag use Spigot's /tps? (Updated by minutes, much slower, but more accurate!)
settings:
  language: English
  auto-update: true
  enable-api: true
  use-internal-tps: true

#Controls ALL of Clearlag's broadcasting. Disabling this will disable ALL broadcasting on Clearlag
# -- 'enabled' Should clearlag broadcast messages at all? (Example: Auto-removal, warnings, ect)
# -- 'async' Should messages be broadcasted on another thread
# -- 'use-permission-for-broadcasts' Should clearlag use permissions?
# -- 'permission' What is the permission? (By default, it's bukkit's default)
global-broadcasts:
  enabled: true
  async: false
  use-permission-for-broadcasts: false
  permission: bukkit.broadcast

#Monitors your server's main thread for locking/freezing. Helps figure out what's causing lag-spikes
# NOTE: This will outprint mostly just stacktraces. It's up to YOU to interpret the stacktrace
# NOTE: (!Important!) Clearlag will print EVERYTHING to your Spigot/Bukkit server logs!
# NOTE: A large 'Garbage collection time' generally means the spike was caused by the Garbage collector (Memory issue basically..)
# -- 'enabled' Should this be enabled (Prints data to your logs, not ingame chat)
# -- 'min-elapsed-time' How long (IN MILLISECONDS) of a server-tick constitutes a freeze/lock? I don't recommend going under ~80
# -- 'check-interval' How often (IN MILLISECONDS) should the server be checked? Lower the number, more accurate the timings
# -- 'follow-stack' Should Clearlag keep printing the stacktrace every time it changes (Can be very spammy)?
# Help-> https://dev.bukkit.org/projects/ ... cause-of-lag-spikes
lag-spike-helper:
  enabled: false
  min-elapsed-time: 500
  check-interval: 100
  follow-stack: true

#Limits the amount of item transfers for all the hoppers in a single chunk
# -- 'transfer-limit' How many transfers per check interval until the hopper should be disabled
# -- 'check-interval' In seconds, on what interval should the transfer limit be reset
hopper-limiter:
  enabled: false
  transfer-limit: 5
  check-interval: 1

#Meters your ram usage. If it goes above 'limit', run 'commands:'
# NOTE: It's perfectly normal for your server to be using a lot of memory. The JVM's garbage collector will automatically free memory.
# NOTE: Only use this if you have very little memory that can't support the server
# -- 'ram-limit' is in MB, do not set it exactly to your max allocated ram amount
# -- 'interval' is how often clearlag will check your ram usage
# -- 'commands' lists the commands that will be ran upon hitting your ram-limit
ram-meter:
  enabled: false
  interval: 20
  ram-limit: 5000
  commands:
- 'lagg killmobs'
- 'lagg clear'

#Configure what the '/lagg halt' command does
# -- 'remove-entities' remove entities such as items, primed-tnt, and mobs
# -- 'disable-natural-entity-spawning' disables the server's natural world spawning
# -- 'halted' this section defines which actions should be halted during '/lagg halt'
halt-command:
  remove-entities: true
  disable-natural-entity-spawning: true
  halted:
fire: true
fire-burn: true
explosion: true
decay: true
block-fade: true
block-form: true
block-spread: true
block-natural-change: true

#This limits how fast a user can move by walking or flying in a single tick (20 ticks a second)
#I HIGHLY recommend you use this on servers with increased player-speed/fly to prevent chunk overload
#You may also use Spigot's internal speed limiters to achieve the same goal if present on your version (better performance)
# -- 'move-max-speed' Max speed on foot
# -- 'fly-max-speed'  Max speed while flying
player-speed-limiter:
  enabled: false
  move-max-speed: 0.7
  fly-max-speed: 0.8

#Set the age of specific items when they're first spawned so they naturally despawn faster, or slower then others
#Recommended for servers with a lot of item-entities consisting mostly of useless items (Such as stone)
#Material list: https://hub.spigotmc.org/javadocs/spigot/org/bukkit/Material.html
# -- 'items' Lists the material names of the entities with their spawn-age (In seconds)
item-spawn-age-setter:
  enabled: false
  items:
stone: 240
grass: 240
cobblestone: 240
log: 240
stone_axe: 240
stone_pickaxe: 240
stone_sword: 240
wooden_axe: 240
wooden_pickaxe: 240
wooden_sword: 240
rotten_flesh: 240
gravel: 240
dirt: 240
leather: 200
sand: 240
bone: 240
beef: 240
chicken: 160
rabbit: 240
salmon: 240
cactus: 210
wool: 180
arrow: 160
PORKCHOP: 240
potato: 240
RED_TULIP: 240

#Should mobs be nerfed to prevent over-breeding to reduce CPU usage (And possibly raise TPS)
#When mobs are stuck too close, collisions are extremely intensive putting a pretty mean load on the server
# -- 'max-mobs' means how many bably/adult animals are allowed within the 'check-radius'
# -- 'check-radius' is the radius of what clearlag will check for 'max-mobs'
mob-breeding-limiter:
  enabled: false
  max-mobs: 6
  check-radius: 15

#Should clearlag purge logs under /logs when the server starts?
# -- 'days-old' means how many days old can the log be to be deleted
log-purger:
  enabled: false
  days-old: 3

#What type of entities SHOULD NOT be removed while doing /lagg area?
area-filter:
- Itemframe
- Minecart
- Wolf
- Villager
- Horse
- ARMOR_STAND

#Should clearlag reset the config, or attempt to update your config on updates
# -- 'force-update' is whether or not clearlag will reset your config with a newer version
# -- settings this to false will make clearlag update your config rather then resetting
config-updater:
  force-update: false

#This limits the mob egg spawners so players cannot "overload" the server with them
# -- 'check-radius' is the radius clearlag will check for nearby entities
# -- 'max-mobs' is how many entities may be in the radius before the spawning is blocked
mobegg-limiter:
  enabled: false
  check-radius: 8
  max-mobs: 5

#Disable new chunk generation, or just put a cap on how many can load at once.
#May cause many bugs with Spigot 1.8+, not recommended!
# -- 'create-new-chunks' disables or enables chunk creation. false would disallow new chunks
# -- !UNSTABLE ON SPIGOT BUILDS!
chunk-limiter:
  enabled: false
  limit: 6000
  create-new-chunks: true

#This modifies the view range of entities
# -- Lower it is, the better your entity tick will be and the more CPU cycles you'll save
# -- If it's too high, expect bugs / lots of lag
mob-range:
  enabled: false
  zombie: 30
  skeleton: 30
  creeper: 20

#How long should items/Mobs be left on the ground
# -- live-time's go by ticks (20 ticks a second)
live-time:
  enabled: false
  interval: 10
  mobtimer: true
  itemtimer: true
  arrowtimer: true
  arrowkilltime: 15
  moblivetime: 600
  itemlivetime: 240

#This option disallows the placement of too many tnt-minecarts
# -- 'radius' is the radius clearlag will check for TNT-Minecarts
tnt-minecart:
  enabled: false
  max: 2
  radius: 6

#This option reduces global dispenser fire rate
# -- 'time' is in milliseconds
dispenser-reducer:
  enabled: false
  time: 100

#This option reduces the explosions of mass amounts of tnt, and reduces tnt lag
# -- 'check-radius' is the radius clearlag will check for primed TNT
# -- 'max-primed' is the max primed TNT within the radius allowed before clearlag begins to remove
tnt-reducer:
  enabled: false
  check-radius: 5
  max-primed: 3

#This option reduces fire spread rate
# -- 'time' is in milliseconds
firespread-reducer:
  enabled: false
  time: 2000

#How many entities should one chunk be allowed to hold?
# -- 'entities' lists all the entities that will be counted
#    and possibly removed.
chunk-entity-limiter:
  enabled: false
  limit: 10
  entities:
- Squid
- Zombie
- Skeleton
- Creeper
- Chicken
- Pig
- Sheep
- Cow
- Horse
  # - Pig liveTime=100 <- This mob will be REMOVED if it's been alive for 100 ticks (5 seconds)

#A per-entity chunk limiter. Very useful to limiting useless mobs like squid, but not zombies
# -- 'entity-limits' lists all the entities, their filters, and 'limit' to specify their limit
# to be removed/culled
# -- 'passive-purger' Enables random checking of chunks to see whether they're exceeding limits.
# -- Useful for when you want to prevent lag exploiting
# -- 'passive-cleaning-enabled' Enables the passive-purger
# -- 'check-interval' How often (in ticks, 50MS) should chunks be checked
# -- 'chunk-batch-size' How many chunks at once should be checked
per-entity-chunk-entity-limiter:
  enabled: false
  entity-limits:
- Squid limit:1
- Zombie limit:2
- Skeleton limit:2
- Creeper limit:2
- Chicken limit:3
- Pig limit:5
- Sheep limit:5
- Cow limit:5
- Horse limit:3 !hasName
- Villager limit:4
- Arrow limit:4 inGround
- Rabbit limit:2
- PufferFish limit:2
- Silverfish limit:2
- TROPICAL_FISH limit:2
- COD limit:2
- DOLPHIN limit:2
- Bat limit:1
- Armorstand limit:10
  passive-cleaner:
passive-cleaning-enabled: false
check-interval: 20
chunk-batch-size: 100

#How many mobs should be allowed to spawn globally
# -- 'interval' is the check interval check the current spawn amounts
spawn-limiter:
  enabled: false
  interval: 15
  mobs: 300
  animals: 300

#Meters your TPS, if it goes to low, run the commands you wrote below!
# -- 'interval' is how often tps-meter will check the TPS
# -- 'tps-trigger' is at what TPS the commands will be ran at
# -- 'tps-recover' is at what TPS should the TPS be considered stable after 'tps-trigger' is executed
# -- 'commands' lists what commands will be executed when tps-tigger is reached
# -- 'recover-commands' lists what commands will be executed when tps-recover is reached
# -- 'trigger-broadcast-message' specifies which message should be broadcasted when tps-trigger runs
# -- 'recover-broadcast-message' specifies which message should be broadcasted when TPS recovers
# -- 'broadcast-enabled' defines whether or not tps-meter should broadcast
tps-meter:
  enabled: false
  trigger-broadcast-message: '&6[扫地娘] &cThe server is overloaded, executing lag-perventing measures'
  recover-broadcast-message: '&6[扫地娘] &aThe server is no longer overloaded!'
  broadcast-enabled: false
  interval: 15
  tps-trigger: 16.0
  tps-recover: 19.0
  commands:
- 'lagg killmobs'
- 'lagg clear'
- 'lagg halt on'
  recover-commands:
- 'lagg halt off'

#This is /lagg killmobs, put what you DON'T want removed!
# -- 'remove-named', when FALSE entities with custom names will NOT be removed
# -- 'mob-filter' lists which mobs will be IGNORED during /lagg killmobs
kill-mobs:
remove-named: false
mob-filter:
- Villager
- Wolf
#  - Pig !name="Test" <- This entity will filtered if the name does NOT equal "Test"
#  - Zombie hasName <- This entity will be filtered if it HAS a name
- ARMOR_STAND
- Horse

#This nerfs mob-spawners (Natural and player-made)
#-------------------------------------------------
#This goes by chunks rather then spawners. This is to prevent
#a large buildup of mob-spawners within a small region to "bypass"
#your set limit. It also allows for keys to be generated more easily
#increasing the performance
# -- 'max-spawn' is the maximum mobs allowed to spawn by a mob-spawner
# -- 'remove-mobs-on-chunk-unload' is whether or not Clearlag should remove
# --  the mobs spawned by the mobspawner upon chunk unload (Highly Recommended)
mobspawner:
  enabled: false
  max-spawn: 4
  remove-mobs-on-chunk-unload: true

#Dont use if you have CB++ or Spigot!
item-merger:
  enabled: false
  radius: 6

#Auto-removal options
# -- warnings works like this; time = the time warning should be given, msg = warning message at that time
# -- NOTE: The below 'remove' section applies to this remover!
# -- NOTE: Putting the interval to low will cause issues!
# -- NOTE: To disable "warnings", set it to "warnings: []"
# -- NOTE: bukkit.broadcast.user permission will allow users to see broadcasts (If not enabled by default)
#
#       !==[ All string values MUST be inside '']==!
#
# -- 'remove-entities' lists what entities should be REMOVED on removal
# -- 'warnings' list warnings to be given out at specified times
# -- 'item-filter' What ground-items should NOT be removed during removal
# -- 'remove-entities' What entities SHOULD be removed during removal
auto-removal:
  enabled: false
  broadcast-message: '&6[扫地娘] &a已清理 +RemoveAmount 实体!'
  broadcast-removal: true
  autoremoval-interval: 460
  world-filter:
  # - this_world <-This world will be ignored during removal!
  boat: false
  falling-block: true
  experience-orb: true
  painting: false
  projectile: false
  item: true
  itemframe: false
  minecart: false
  primed-tnt: true
  item-filter:
  # - Stone <-This item-id will be ignored during removal!
  # - Grass
  remove-entities:
- Arrow onGround
- Snowball
- Egg
- Fireball
- Skeleton
- Zombie
- Creeper
- Spider
  # - cow <- This mob-type will be REMOVED during removal!
  # - MINECART_MOB_SPAWNER
  # - Pig liveTime=100 <- This mob will be REMOVED if it's been alive for 100 ticks (5 seconds)
  # - Minecart !isMounted <- This entity will be REMOVED if it's NOT mounted
  # - Wolf !hasName <- This entity will be REMOVED if it doesn't have a name
  warnings:
      - 'time:400 msg:&3[&b扫地娘&3] &a还有&7+remaining &2秒清理地面垃圾'
      - 'time:440 msg:&3[&b扫地娘&3] &a还有&7+remaining &2秒清理地面垃圾!'

#What should be removed during /lagg clear, nearly the same thing as auto-removal
command-remove:
  world-filter:
  # - this_world <-This world will be ignored during removal!
  broadcast-removal: false
  boat: true
  falling-block: true
  experience-orb: true
  painting: false
  projectile: true
  item: true
  itemframe: false
  minecart: false
  primed-tnt: true
  item-filter:
  # - Stone <-This item-id will be ignored during removal!
  # - Grass
  remove-entities:
  # - cow <- This mob-type will be REMOVED during removal!
  # - MINECART_MOB_SPAWNER
  # - Pig liveTime=100 <- This mob will be REMOVED if it's been alive for 100 ticks (5 seconds)
  # - Minecart !isMounted <- This entity will be REMOVED if it's NOT mounted
  # - Wolf !hasName <- This entity will be REMOVED if it doesn't have a name

#Very very old, but still works. Just specifies a global entity limit. I'd recommend 'custom-trigger-removal' instead
# -- 'max' max entities allowed before the entity removal is activated
limit:
  enabled: false
  max: 1000
  check-interval: 60
  broadcast-message: '&6[ClearLag] &aLimit reached, removed +RemoveAmount Entities!'
  world-filter:
  # - this_world <-This world will be ignored during removal!
  broadcast-removal: true
  boat: true
  falling-block: true
  experience-orb: true
  painting: false
  projectile: true
  item: true
  itemframe: false
  minecart: true
  primed-tnt: true
  item-filter:
  # - Stone
  # - Grass <-This item-id will be ignored during removal!

# Create your own custom removal stuff!
# -- warnings works like this; time = the time warning should be given, msg = warning message at that time
# -- NOTE: The below 'remove' section applies to this remover!
# \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/
# > READ FOR HELP -> https://dev.bukkit.org/projects/clearlagg/pages/config-setup <- READ FOR HELP <
# /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\
custom-trigger-removal:
  enabled: false
  triggers:
trigger1:
   trigger-type: tps-trigger
   run-interval: 5
   tps-trigger: 14.0
   tps-recover: 17.0
   jobs:
      command-executor:
      commands:
         - 'lagg killmobs'
         - 'lagg clear'
         - 'lagg halt'
      recover-commands:
         - 'lagg halt'
      entity-clearer:
      execute-job-time: 120
      warnings:
         - 'time:60 msg:&4[ClearLag] &cEntities/drops will be purged in &7+remaining &cseconds!'
         - 'time:100 msg:&4[ClearLag] &cEntities/drops will be purged in &720 &cseconds!'
         - 'time:110 msg:&4[ClearLag] &cEntities/drops will be purged in &710 &cseconds!'
      world-filter:
      # - world <-This world will be ignored during removal
      removeEntities:
         - item
         - zombie !hasName
         - skeleton !hasName
         - pig !hasName
         - cow !hasName
trigger2:
   trigger-type: entity-limit-trigger
   run-interval: 25
   limit: 200
   world-filter:
      # - world <-This world will be ignored during checking
   entity-limits:
      - zombie
      - skeleton
      - enderman
   jobs:
      entity-clearer:
      world-filter:
      # - world <-This world will be ignored during removal
      remove-entities:
         - zombie
         - skeleton
         - enderman

Thehrz

试试clearlagg 最大的优势可以自定义清理规则但似乎不支持1.18

https://dev.bukkit.org/projects/clearlagg

但不是很建议使用这种优化插件优化效果往往并不好

feishi_jin

Thehrz 发表于 2022-2-19 13:57
试试clearlagg 最大的优势可以自定义清理规则但似乎不支持1.18

https://dev.bukkit.org/projects/clearla ...

我就是用的找个支持1.18的但是他不能选择被命名的怪物不清理麻了

Thehrz

feishi_jin 发表于 2022-2-19 14:02
我就是用的找个支持1.18的但是他不能选择被命名的怪物不清理麻了

上传plugins/ClearLag/config.yml

feishi_jin

Thehrz 发表于 2022-2-19 14:12
上传plugins/ClearLag/config.yml

发了好兄弟帮忙看一下我也不懂

Thehrz

feishi_jin 发表于 2022-2-19 14:34
发了好兄弟帮忙看一下我也不懂

能不能以文件形式上传测试一下应该不会自动删除有名字的僵尸了

config-version: 20

# -- 'use-internal-tps' Should clearlag just use the calculated internal TPS? (Improves accuracy)
# -- 'language' Clearlag supports multiple languages (https://github.com/bob7l/Clearlag-Languages) translated by the community
# -- 'use-internal-tps' Should Clearlag use Spigot's /tps? (Updated by minutes, much slower, but more accurate!)
settings:
  language: English
  auto-update: true
  enable-api: true
  use-internal-tps: true

#Controls ALL of Clearlag's broadcasting. Disabling this will disable ALL broadcasting on Clearlag
# -- 'enabled' Should clearlag broadcast messages at all? (Example: Auto-removal, warnings, ect)
# -- 'async' Should messages be broadcasted on another thread
# -- 'use-permission-for-broadcasts' Should clearlag use permissions?
# -- 'permission' What is the permission? (By default, it's bukkit's default)
global-broadcasts:
  enabled: true
  async: false
  use-permission-for-broadcasts: false
  permission: bukkit.broadcast

#Monitors your server's main thread for locking/freezing. Helps figure out what's causing lag-spikes
# NOTE: This will outprint mostly just stacktraces. It's up to YOU to interpret the stacktrace
# NOTE: (!Important!) Clearlag will print EVERYTHING to your Spigot/Bukkit server logs!
# NOTE: A large 'Garbage collection time' generally means the spike was caused by the Garbage collector (Memory issue basically..)
# -- 'enabled' Should this be enabled (Prints data to your logs, not ingame chat)
# -- 'min-elapsed-time' How long (IN MILLISECONDS) of a server-tick constitutes a freeze/lock? I don't recommend going under ~80
# -- 'check-interval' How often (IN MILLISECONDS) should the server be checked? Lower the number, more accurate the timings
# -- 'follow-stack' Should Clearlag keep printing the stacktrace every time it changes (Can be very spammy)?
# Help-> https://dev.bukkit.org/projects/ ... cause-of-lag-spikes
lag-spike-helper:
  enabled: false
  min-elapsed-time: 500
  check-interval: 100
  follow-stack: true

#Limits the amount of item transfers for all the hoppers in a single chunk
# -- 'transfer-limit' How many transfers per check interval until the hopper should be disabled
# -- 'check-interval' In seconds, on what interval should the transfer limit be reset
hopper-limiter:
  enabled: false
  transfer-limit: 5
  check-interval: 1

#Meters your ram usage. If it goes above 'limit', run 'commands:'
# NOTE: It's perfectly normal for your server to be using a lot of memory. The JVM's garbage collector will automatically free memory.
# NOTE: Only use this if you have very little memory that can't support the server
# -- 'ram-limit' is in MB, do not set it exactly to your max allocated ram amount
# -- 'interval' is how often clearlag will check your ram usage
# -- 'commands' lists the commands that will be ran upon hitting your ram-limit
ram-meter:
  enabled: false
  interval: 20
  ram-limit: 5000
  commands:
- 'lagg killmobs'
- 'lagg clear'

#Configure what the '/lagg halt' command does
# -- 'remove-entities' remove entities such as items, primed-tnt, and mobs
# -- 'disable-natural-entity-spawning' disables the server's natural world spawning
# -- 'halted' this section defines which actions should be halted during '/lagg halt'
halt-command:
  remove-entities: true
  disable-natural-entity-spawning: true
  halted:
fire: true
fire-burn: true
explosion: true
decay: true
block-fade: true
block-form: true
block-spread: true
block-natural-change: true

#This limits how fast a user can move by walking or flying in a single tick (20 ticks a second)
#I HIGHLY recommend you use this on servers with increased player-speed/fly to prevent chunk overload
#You may also use Spigot's internal speed limiters to achieve the same goal if present on your version (better performance)
# -- 'move-max-speed' Max speed on foot
# -- 'fly-max-speed'  Max speed while flying
player-speed-limiter:
  enabled: false
  move-max-speed: 0.7
  fly-max-speed: 0.8

#Set the age of specific items when they're first spawned so they naturally despawn faster, or slower then others
#Recommended for servers with a lot of item-entities consisting mostly of useless items (Such as stone)
#Material list: https://hub.spigotmc.org/javadocs/spigot/org/bukkit/Material.html
# -- 'items' Lists the material names of the entities with their spawn-age (In seconds)
item-spawn-age-setter:
  enabled: false
  items:
stone: 240
grass: 240
cobblestone: 240
log: 240
stone_axe: 240
stone_pickaxe: 240
stone_sword: 240
wooden_axe: 240
wooden_pickaxe: 240
wooden_sword: 240
rotten_flesh: 240
gravel: 240
dirt: 240
leather: 200
sand: 240
bone: 240
beef: 240
chicken: 160
rabbit: 240
salmon: 240
cactus: 210
wool: 180
arrow: 160
PORKCHOP: 240
potato: 240
RED_TULIP: 240

#Should mobs be nerfed to prevent over-breeding to reduce CPU usage (And possibly raise TPS)
#When mobs are stuck too close, collisions are extremely intensive putting a pretty mean load on the server
# -- 'max-mobs' means how many bably/adult animals are allowed within the 'check-radius'
# -- 'check-radius' is the radius of what clearlag will check for 'max-mobs'
mob-breeding-limiter:
  enabled: false
  max-mobs: 6
  check-radius: 15

#Should clearlag purge logs under /logs when the server starts?
# -- 'days-old' means how many days old can the log be to be deleted
log-purger:
  enabled: false
  days-old: 3

#What type of entities SHOULD NOT be removed while doing /lagg area?
area-filter:
- Itemframe
- Minecart
- Wolf
- Villager
- Horse
- ARMOR_STAND

#Should clearlag reset the config, or attempt to update your config on updates
# -- 'force-update' is whether or not clearlag will reset your config with a newer version
# -- settings this to false will make clearlag update your config rather then resetting
config-updater:
  force-update: false

#This limits the mob egg spawners so players cannot "overload" the server with them
# -- 'check-radius' is the radius clearlag will check for nearby entities
# -- 'max-mobs' is how many entities may be in the radius before the spawning is blocked
mobegg-limiter:
  enabled: false
  check-radius: 8
  max-mobs: 5

#Disable new chunk generation, or just put a cap on how many can load at once.
#May cause many bugs with Spigot 1.8+, not recommended!
# -- 'create-new-chunks' disables or enables chunk creation. false would disallow new chunks
# -- !UNSTABLE ON SPIGOT BUILDS!
chunk-limiter:
  enabled: false
  limit: 6000
  create-new-chunks: true

#This modifies the view range of entities
# -- Lower it is, the better your entity tick will be and the more CPU cycles you'll save
# -- If it's too high, expect bugs / lots of lag
mob-range:
  enabled: false
  zombie: 30
  skeleton: 30
  creeper: 20

#How long should items/Mobs be left on the ground
# -- live-time's go by ticks (20 ticks a second)
live-time:
  enabled: false
  interval: 10
  mobtimer: true
  itemtimer: true
  arrowtimer: true
  arrowkilltime: 15
  moblivetime: 600
  itemlivetime: 240

#This option disallows the placement of too many tnt-minecarts
# -- 'radius' is the radius clearlag will check for TNT-Minecarts
tnt-minecart:
  enabled: false
  max: 2
  radius: 6

#This option reduces global dispenser fire rate
# -- 'time' is in milliseconds
dispenser-reducer:
  enabled: false
  time: 100

#This option reduces the explosions of mass amounts of tnt, and reduces tnt lag
# -- 'check-radius' is the radius clearlag will check for primed TNT
# -- 'max-primed' is the max primed TNT within the radius allowed before clearlag begins to remove
tnt-reducer:
  enabled: false
  check-radius: 5
  max-primed: 3

#This option reduces fire spread rate
# -- 'time' is in milliseconds
firespread-reducer:
  enabled: false
  time: 2000

#How many entities should one chunk be allowed to hold?
# -- 'entities' lists all the entities that will be counted
#    and possibly removed.
chunk-entity-limiter:
  enabled: false
  limit: 10
  entities:
- Squid
- Zombie
- Skeleton
- Creeper
- Chicken
- Pig
- Sheep
- Cow
- Horse
  # - Pig liveTime=100 <- This mob will be REMOVED if it's been alive for 100 ticks (5 seconds)

#A per-entity chunk limiter. Very useful to limiting useless mobs like squid, but not zombies
# -- 'entity-limits' lists all the entities, their filters, and 'limit' to specify their limit
# to be removed/culled
# -- 'passive-purger' Enables random checking of chunks to see whether they're exceeding limits.
# -- Useful for when you want to prevent lag exploiting
# -- 'passive-cleaning-enabled' Enables the passive-purger
# -- 'check-interval' How often (in ticks, 50MS) should chunks be checked
# -- 'chunk-batch-size' How many chunks at once should be checked
per-entity-chunk-entity-limiter:
  enabled: false
  entity-limits:
- Squid limit:1
- Zombie limit:2
- Skeleton limit:2
- Creeper limit:2
- Chicken limit:3
- Pig limit:5
- Sheep limit:5
- Cow limit:5
- Horse limit:3 !hasName
- Villager limit:4
- Arrow limit:4 inGround
- Rabbit limit:2
- PufferFish limit:2
- Silverfish limit:2
- TROPICAL_FISH limit:2
- COD limit:2
- DOLPHIN limit:2
- Bat limit:1
- Armorstand limit:10
  passive-cleaner:
passive-cleaning-enabled: false
check-interval: 20
chunk-batch-size: 100

#How many mobs should be allowed to spawn globally
# -- 'interval' is the check interval check the current spawn amounts
spawn-limiter:
  enabled: false
  interval: 15
  mobs: 300
  animals: 300

#Meters your TPS, if it goes to low, run the commands you wrote below!
# -- 'interval' is how often tps-meter will check the TPS
# -- 'tps-trigger' is at what TPS the commands will be ran at
# -- 'tps-recover' is at what TPS should the TPS be considered stable after 'tps-trigger' is executed
# -- 'commands' lists what commands will be executed when tps-tigger is reached
# -- 'recover-commands' lists what commands will be executed when tps-recover is reached
# -- 'trigger-broadcast-message' specifies which message should be broadcasted when tps-trigger runs
# -- 'recover-broadcast-message' specifies which message should be broadcasted when TPS recovers
# -- 'broadcast-enabled' defines whether or not tps-meter should broadcast
tps-meter:
  enabled: false
  trigger-broadcast-message: '&6[扫地娘] &cThe server is overloaded, executing lag-perventing measures'
  recover-broadcast-message: '&6[扫地娘] &aThe server is no longer overloaded!'
  broadcast-enabled: false
  interval: 15
  tps-trigger: 16.0
  tps-recover: 19.0
  commands:
- 'lagg killmobs'
- 'lagg clear'
- 'lagg halt on'
  recover-commands:
- 'lagg halt off'

#This is /lagg killmobs, put what you DON'T want removed!
# -- 'remove-named', when FALSE entities with custom names will NOT be removed
# -- 'mob-filter' lists which mobs will be IGNORED during /lagg killmobs
kill-mobs:
remove-named: false
mob-filter:
- Villager
- Wolf
#  - Pig !name="Test" <- This entity will filtered if the name does NOT equal "Test"
#  - Zombie hasName <- This entity will be filtered if it HAS a name
- ARMOR_STAND
- Horse

#This nerfs mob-spawners (Natural and player-made)
#-------------------------------------------------
#This goes by chunks rather then spawners. This is to prevent
#a large buildup of mob-spawners within a small region to "bypass"
#your set limit. It also allows for keys to be generated more easily
#increasing the performance
# -- 'max-spawn' is the maximum mobs allowed to spawn by a mob-spawner
# -- 'remove-mobs-on-chunk-unload' is whether or not Clearlag should remove
# --  the mobs spawned by the mobspawner upon chunk unload (Highly Recommended)
mobspawner:
  enabled: false
  max-spawn: 4
  remove-mobs-on-chunk-unload: true

#Dont use if you have CB++ or Spigot!
item-merger:
  enabled: false
  radius: 6

#Auto-removal options
# -- warnings works like this; time = the time warning should be given, msg = warning message at that time
# -- NOTE: The below 'remove' section applies to this remover!
# -- NOTE: Putting the interval to low will cause issues!
# -- NOTE: To disable "warnings", set it to "warnings: []"
# -- NOTE: bukkit.broadcast.user permission will allow users to see broadcasts (If not enabled by default)
#
#       !==[ All string values MUST be inside '']==!
#
# -- 'remove-entities' lists what entities should be REMOVED on removal
# -- 'warnings' list warnings to be given out at specified times
# -- 'item-filter' What ground-items should NOT be removed during removal
# -- 'remove-entities' What entities SHOULD be removed during removal
auto-removal:
  enabled: false
  broadcast-message: '&6[扫地娘] &a已清理 +RemoveAmount 实体!'
  broadcast-removal: true
  autoremoval-interval: 460
  world-filter:
  # - this_world <-This world will be ignored during removal!
  boat: false
  falling-block: true
  experience-orb: true
  painting: false
  projectile: false
  item: true
  itemframe: false
  minecart: false
  primed-tnt: true
  item-filter:
  # - Stone <-This item-id will be ignored during removal!
  # - Grass
  remove-entities:
- Arrow onGround
- Snowball
- Egg
- Fireball
- Skeleton
- Zombie !hasName
- Creeper
- Spider
  # - cow <- This mob-type will be REMOVED during removal!
  # - MINECART_MOB_SPAWNER
  # - Pig liveTime=100 <- This mob will be REMOVED if it's been alive for 100 ticks (5 seconds)
  # - Minecart !isMounted <- This entity will be REMOVED if it's NOT mounted
  # - Wolf !hasName <- This entity will be REMOVED if it doesn't have a name
  warnings:
      - 'time:400 msg:&3[&b扫地娘&3] &a还有&7+remaining &2秒清理地面垃圾'
      - 'time:440 msg:&3[&b扫地娘&3] &a还有&7+remaining &2秒清理地面垃圾!'

#What should be removed during /lagg clear, nearly the same thing as auto-removal
command-remove:
  world-filter:
  # - this_world <-This world will be ignored during removal!
  broadcast-removal: false
  boat: true
  falling-block: true
  experience-orb: true
  painting: false
  projectile: true
  item: true
  itemframe: false
  minecart: false
  primed-tnt: true
  item-filter:
  # - Stone <-This item-id will be ignored during removal!
  # - Grass
  remove-entities:
  # - cow <- This mob-type will be REMOVED during removal!
  # - MINECART_MOB_SPAWNER
  # - Pig liveTime=100 <- This mob will be REMOVED if it's been alive for 100 ticks (5 seconds)
  # - Minecart !isMounted <- This entity will be REMOVED if it's NOT mounted
  # - Wolf !hasName <- This entity will be REMOVED if it doesn't have a name

#Very very old, but still works. Just specifies a global entity limit. I'd recommend 'custom-trigger-removal' instead
# -- 'max' max entities allowed before the entity removal is activated
limit:
  enabled: false
  max: 1000
  check-interval: 60
  broadcast-message: '&6[ClearLag] &aLimit reached, removed +RemoveAmount Entities!'
  world-filter:
  # - this_world <-This world will be ignored during removal!
  broadcast-removal: true
  boat: true
  falling-block: true
  experience-orb: true
  painting: false
  projectile: true
  item: true
  itemframe: false
  minecart: true
  primed-tnt: true
  item-filter:
  # - Stone
  # - Grass <-This item-id will be ignored during removal!

# Create your own custom removal stuff!
# -- warnings works like this; time = the time warning should be given, msg = warning message at that time
# -- NOTE: The below 'remove' section applies to this remover!
# \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/
# > READ FOR HELP -> https://dev.bukkit.org/projects/clearlagg/pages/config-setup <- READ FOR HELP <
# /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\
custom-trigger-removal:
  enabled: false
  triggers:
trigger1:
   trigger-type: tps-trigger
   run-interval: 5
   tps-trigger: 14.0
   tps-recover: 17.0
   jobs:
      command-executor:
      commands:
         - 'lagg killmobs'
         - 'lagg clear'
         - 'lagg halt'
      recover-commands:
         - 'lagg halt'
      entity-clearer:
      execute-job-time: 120
      warnings:
         - 'time:60 msg:&4[ClearLag] &cEntities/drops will be purged in &7+remaining &cseconds!'
         - 'time:100 msg:&4[ClearLag] &cEntities/drops will be purged in &720 &cseconds!'
         - 'time:110 msg:&4[ClearLag] &cEntities/drops will be purged in &710 &cseconds!'
      world-filter:
      # - world <-This world will be ignored during removal
      removeEntities:
         - item
         - zombie !hasName
         - skeleton !hasName
         - pig !hasName
         - cow !hasName
trigger2:
   trigger-type: entity-limit-trigger
   run-interval: 25
   limit: 200
   world-filter:
      # - world <-This world will be ignored during checking
   entity-limits:
      - zombie
      - skeleton
      - enderman
   jobs:
      entity-clearer:
      world-filter:
      # - world <-This world will be ignored during removal
      remove-entities:
         - zombie
         - skeleton
         - enderman

Flower_胡子

本帖最后由 Flower_胡子于 2022-2-19 17:10 编辑

参阅我签名档的自写自用插件
https://www.mcbbs.net/thread-1283396-1-1.html
同样也是高度自定义如果意见反馈可私信或者帖内留言评分

# 清理命名实体
Nam: true

feishi_jin

Thehrz 发表于 2022-2-19 16:30
能不能以文件形式上传测试一下应该不会自动删除有名字的僵尸了

好了这个有用被命名的僵尸不会被清理了如果是末影满同样的话也能用这个方法去处理吧？

Thehrz

feishi_jin 发表于 2022-2-20 12:07
好了这个有用被命名的僵尸不会被清理了如果是末影满同样的话也能用这个方法去处理吧？ ...

是的加上 !hasName