本帖最后由 DaYaLi 于 2021-1-30 18:34 编辑
我使用的是paper1.16.4核心。我的领地插件是Residence4.9.2.3
group文件配置如下
++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++++
依照插件原帖的问答部分，我已经更改了范围，并且确认了权限组正确。
但不论如何，游戏中领地圈地范围仍然为xz轴最大不超过20
请大佬教教我怎么解决吧！谢谢你！
我使用的是paper1.16.4核心。我的领地插件是Residence4.9.2.3
group文件配置如下
++++++++++++++++++++++++++++++++++++++++++++++++++++++
# These groups correspond to the Permissions groups defined in your '<worldname>.yml'
Groups:
Default: #group name, DONT remove this group
# Information about the Residence zone that the player can define.
#Uncomment the lines below to mirror this config to other groups.
#Mirror:
#- 'group1'
#- 'group2'
Residence:
# Determins if this group can create residences or not. This option can be overriden with the permissions node 'residence.create'
CanCreate: true
# The maximum number of Residences a player can have.
MaxResidences: 5
# The maximum number of physical areas a residence can have.
MaxAreasPerResidence: 3
# The maximum number of blocks a Residence can be, East to West (X).
MaxEastWest: 100
# (Optional) The minimum number of blocks a Residence can be, East to West (X).
MinEastWest: 3
# The maximum number of blocks a Residence can be, North to South (Z).
MaxNorthSouth: 100
# (Optional) The minimum number of blocks a Residence can be, North to South (Z).
MinNorthSouth: 3
# The maximum number of blocks a Residence can be, High to Low (Y).
MaxUpDown: 256
# (Optional) The minimum number of blocks a Residence can be, High to Low (Y).
MinUpDown: 3
# The lowest altitude this group is allowed to protect.
MinHeight: 0
# The highest altitude this group is allowed to protect.
MaxHeight: 255
# The maximum amount of subzones can current area have.
MaxSubzonesInArea: 3
# The maximum recursive depth that subzones can go.
# A subzone within a subzone within the Residence zone would be a depth of 2.
# Set to 0 to disable subzones.
SubzoneDepth: 3
# (Optional) The maximum number of blocks a Residence Subzone can be, East to West (X).
SubzoneMaxEastWest: 100
# (Optional) The minimum number of blocks a Residence Subzone can be, East to West (X).
SubzoneMinEastWest: 3
# (Optional) The maximum number of blocks a Residence Subzone can be, North to South (Z).
SubzoneMaxNorthSouth: 100
# (Optional) The minimum number of blocks a Residence Subzone can be, North to South (Z).
SubzoneMinNorthSouth: 3
# (Optional) The maximum number of blocks a Residence Subzone can be, High to Low (Y).
SubzoneMaxUpDown: 256
# (Optional) The minimum number of blocks a Residence Subzone can be, High to Low (Y).
SubzoneMinUpDown: 3
# Whether or not to allow teleporting to Residences.
CanTeleport: true
# Allow or Disallow the use of /res unstuck, to get yourself out of a residence if stuck in one somehow
Unstuck: true
# Allow or Disallow the use of /res kick, to kick player from residence.
Kick: False
# Allow or Disallow the use of the /res select command, if disabled they can only use the selection tool.
SelectCommandAccess: true
# Allow or Disallow the group to access the Blacklist/Ignorelist for residences they own.
ItemListAccess: true
# Options relating to enter and leave messages on the residence.
Messaging:
# Whether or not the player can change the Residence enter and leave messages.
CanChange: true
# The default enter message to apply to new Residences created by players in this group.
# Leaving the message blank will disable it.
DefaultEnter: "Welcome %player to %residence, owned by %owner."
# The default leave message to apply to new Residences created by players in this group.
# Leaving the message blank will disable it.
DefaultLeave: "Now leaving %residence."
# Options relating to the Lease system.
Lease:
# The maximum number of days to allow leases.
MaxDays: 16
# The number of days to add to the lease following a '/res lease renew' command.
RenewIncrement: 14
#Options related to the rent system
Rent:
#determines how many residences can be rented by players of this group at once
MaxRents: 3
#determines how many residences can be set for rent by players of this group at once
MaxRentables: 3
# determines max days player can rent residence at once
MaxRentDays: 31
# Options relating to the Residence Economy.
Economy:
# Whether or not players in this group can buy other Residences that are for sale.
CanBuy: true
# Whether or not players in this group can sell their Residences.
CanSell: false
# Whether or not to ignore the Residence size/count limits when buying a residence.
IgnoreLimits: false
# The cost, per block, of making a new Residence or adding a area to it.
BuyCost: 0.5
# The cost, per block, player will be getting back when removing residence.
SellCost: 0.25
# The cost, per block, of renewing a Residence lease (if the lease system is enabled).
RenewCost: 0.2
# Flags are checked in the order:
# 1: Player
# 2: Group
# 3: Owner
# 4: If all others are undefined, reverts to default value (usually true).
# Flag permissions default to false.
# These flags settings override the globals.
Flags:
# Specifically allow or deny this group from changing certain flags.
Permission:
#build: true
# Specifys the flags that are applied at residence creation for players of this group.
Default:
#build: true
# Specifys the flags that are applied at to the creator at residence creation.
CreatorDefault:
#build: true
# Specifys the flags that are applied to other groups for this residence, at creation.
GroupDefault:
#default: #group name
#build: false
#these flags are applied specifically to this group whenever they are outside a residence
#these flags will override the flags at the top, under the Global section.
World:
Global: #these flags will apply to all worlds
#build: false
WorldNameHere: #or you can apply them by each individual world
#build: false
NextGroup: #group name, player should have residence.group.nextgroup permission node to have access to this residence group
Residence:
CanCreate: true
MaxResidences: 4
MaxAreasPerResidence: 2
MaxEastWest: 20
MaxNorthSouth: 20
MaxUpDown: 20
MinHeight: 0
MaxHeight: 255
SubzoneDepth: 3
CanTeleport: true
Unstuck: true
Kick: true
SelectCommandAccess: true
ItemListAccess: true
Messaging:
CanChange: true
DefaultEnter: "Welcome %player to %residence, owned by %owner."
DefaultLeave: "Now leaving %residence."
Lease:
MaxDays: 16
RenewIncrement: 14
Rent:
MaxRents: 3
MaxRentables: 3
MaxRentDays: 31
Economy:
CanBuy: true
CanSell: false
IgnoreLimits: false
BuyCost: 0.7
SellCost: 0.3
RenewCost: 0.3
# You can manually specify the group a player is in below, this overrides their permissions group.
GroupAssignments:
bekvon: default
player: default
++++++++++++++++++++++++++++++++++++++++++++++++++++++
依照插件原帖的问答部分，我已经更改了范围，并且确认了权限组正确。
但不论如何，游戏中领地圈地范围仍然为xz轴最大不超过20
请大佬教教我怎么解决吧！谢谢你！
请你把这个文件以附件的形式上传
或者用标签提高可读性
或者用标签提高可读性
复制代码
# These groups correspond to the Permissions groups defined in your '<worldname>.yml'
Groups:
Default: #group name, DONT remove this group
# Information about the Residence zone that the player can define.
#Uncomment the lines below to mirror this config to other groups.
#Mirror:
#- 'group1'
#- 'group2'
Residence:
# Determins if this group can create residences or not. This option can be overriden with the permissions node 'residence.create'
CanCreate: true
# The maximum number of Residences a player can have.
MaxResidences: 3
# The maximum number of physical areas a residence can have.
MaxAreasPerResidence: 3
# The maximum number of blocks a Residence can be, East to West (X).
MaxEastWest: 50
# (Optional) The minimum number of blocks a Residence can be, East to West (X).
MinEastWest: 1
# The maximum number of blocks a Residence can be, North to South (Z).
MaxNorthSouth: 50
# (Optional) The minimum number of blocks a Residence can be, North to South (Z).
MinNorthSouth: 1
# The maximum number of blocks a Residence can be, High to Low (Y).
MaxUpDown: 256
# (Optional) The minimum number of blocks a Residence can be, High to Low (Y).
MinUpDown: 1
# The lowest altitude this group is allowed to protect.
MinHeight: 0
# The highest altitude this group is allowed to protect.
MaxHeight: 255
# The maximum amount of subzones can current area have.
MaxSubzonesInArea: 20
# The maximum recursive depth that subzones can go.
# A subzone within a subzone within the Residence zone would be a depth of 2.
# Set to 0 to disable subzones.
SubzoneDepth: 3
# (Optional) The maximum number of blocks a Residence Subzone can be, East to West (X).
SubzoneMaxEastWest: 50
# (Optional) The minimum number of blocks a Residence Subzone can be, East to West (X).
SubzoneMinEastWest: 1
# (Optional) The maximum number of blocks a Residence Subzone can be, North to South (Z).
SubzoneMaxNorthSouth: 50
# (Optional) The minimum number of blocks a Residence Subzone can be, North to South (Z).
SubzoneMinNorthSouth: 1
# (Optional) The maximum number of blocks a Residence Subzone can be, High to Low (Y).
SubzoneMaxUpDown: 256
# (Optional) The minimum number of blocks a Residence Subzone can be, High to Low (Y).
SubzoneMinUpDown: 1
# Whether or not to allow teleporting to Residences.
CanTeleport: true
# Allow or Disallow the use of /res unstuck, to get yourself out of a residence if stuck in one somehow
Unstuck: true
# Allow or Disallow the use of /res kick, to kick player from residence.
Kick: False
# Allow or Disallow the use of the /res select command, if disabled they can only use the selection tool.
SelectCommandAccess: true
# Allow or Disallow the group to access the Blacklist/Ignorelist for residences they own.
ItemListAccess: true
# Options relating to enter and leave messages on the residence.
Messaging:
# Whether or not the player can change the Residence enter and leave messages.
CanChange: true
# The default enter message to apply to new Residences created by players in this group.
# Leaving the message blank will disable it.
DefaultEnter: '欢迎来到%owner的领地,%residence.'
# The default leave message to apply to new Residences created by players in this group.
# Leaving the message blank will disable it.
DefaultLeave: '你离开了领地,%residence.'
# Options relating to the Lease system.
Lease:
# The maximum number of days to allow leases.
MaxDays: 16
# The number of days to add to the lease following a '/res lease renew' command.
RenewIncrement: 14
#Options related to the rent system
Rent:
#determines how many residences can be rented by players of this group at once
MaxRents: 3
#determines how many residences can be set for rent by players of this group at once
MaxRentables: 3
# determines max days player can rent residence at once
MaxRentDays: 31
# Options relating to the Residence Economy.
Economy:
# Whether or not players in this group can buy other Residences that are for sale.
CanBuy: true
# Whether or not players in this group can sell their Residences.
CanSell: false
# Whether or not to ignore the Residence size/count limits when buying a residence.
IgnoreLimits: false
# The cost, per block, of making a new Residence or adding a area to it.
BuyCost: 1
# The cost, per block, player will be getting back when removing residence.
SellCost: 0.25
# The cost, per block, of renewing a Residence lease (if the lease system is enabled).
RenewCost: 0.2
# Flags are checked in the order:
# 1: Player
# 2: Group
# 3: Owner
# 4: If all others are undefined, reverts to default value (usually true).
# Flag permissions default to false.
# These flags settings override the globals.
Flags:
# Specifically allow or deny this group from changing certain flags.
Permission:
#build: true
# Specifys the flags that are applied at residence creation for players of this group.
Default:
#build: true
# Specifys the flags that are applied at to the creator at residence creation.
CreatorDefault:
#build: true
# Specifys the flags that are applied to other groups for this residence, at creation.
GroupDefault:
#default: #group name
#build: false
#these flags are applied specifically to this group whenever they are outside a residence
#these flags will override the flags at the top, under the Global section.
World:
Global: #these flags will apply to all worlds
#build: false
WorldNameHere: #or you can apply them by each individual world
#build: false
vip1: #group name, player should have residence.group.nextgroup permission node to have access to this residence group
Residence:
CanCreate: true
MaxResidences: 7
MaxAreasPerResidence: 3
MaxEastWest: 95
MaxNorthSouth: 95
MaxUpDown: 256
MinHeight: 0
MaxHeight: 255
SubzoneDepth: 5
CanTeleport: true
Unstuck: true
Kick: true
SelectCommandAccess: true
ItemListAccess: true
Messaging:
CanChange: true
DefaultEnter: '欢迎来到%owner的领地,%residence.'
DefaultLeave: '你离开了领地,%residence.'
Lease:
MaxDays: 16
RenewIncrement: 14
Rent:
MaxRents: 3
MaxRentables: 3
MaxRentDays: 31
Economy:
CanBuy: true
CanSell: false
IgnoreLimits: false
BuyCost: 0.7
SellCost: 0.3
RenewCost: 0.3
设置完成后重载配置 (好像不能重载group配置,推荐关闭服务器修改完成后再打开)
（不要复制我的,格式有些问题）
AbstractPrinter 发表于 2021-1-30 16:46
请你把这个文件以附件的形式上传
或者用标签提高可读性
谢谢谢谢
二五五 发表于 2021-1-30 17:00
红色加粗的地方就是设置领地大小的
设置完成后重载配置 (好像不能重载group配置,推荐关闭服务器修改完成后 ...
我试过了，不管用
DaYaLi 发表于 2021-1-30 18:36
我试过了，不管用
具体怎么个情况你说一下...
你好，如果你需要的是玩家圈地的大小更改的话，其他人的回复就是了
如果你的要求是自己譬如OP圈地希望无限大的话，有OP专门的指令，
请把/res 改成/resadmin
如果你的要求是自己譬如OP圈地希望无限大的话，有OP专门的指令，
请把/res 改成/resadmin
二五五 发表于 2021-1-30 19:15
具体怎么个情况你说一下...
当我将配置文件改好后重启服务器，我用普通玩家的身份圈地，发现最大圈地范围依然是20x20，不论我怎么调数值，一直都不变
DaYaLi 发表于 2021-1-30 19:58
当我将配置文件改好后重启服务器，我用普通玩家的身份圈地，发现最大圈地范围依然是20x20，不论我怎么调 ...
不是分权限组的吗，你看看玩家默认在哪个组照着上面的说法是对的。
AbstractPrinter 发表于 2021-2-2 19:22
不是分权限组的吗，你看看玩家默认在哪个组照着上面的说法是对的。
已经解决啦，哈哈哈 谢谢啦